How To Set Up Spypoint Micro Lte
SPYPOINT Link-Micro-Lte Cellular Trail Camera User Guide
In the box
1x LINK-MICRO-LTE camera
1x Antenna holder
1x Installation strap
1x Quick beginning guide
1x SIM bill of fare that is pre activated and inserted in the camera
Note: Retention card and batteries are sold separately.
User transmission, latest firmware, and FAQ available at:
support.spypoint.com
Components
- Antenna
- Detection lens
- MicroSD carte du jour slot
- Light sensor
- Delay light
- Photograph lens
- LED
- ON/OFF switch
- "Condition" lite
- SIM carte du jour slot
- Bombardment compartment
- Bombardment holder
- Slot for installation strap
- Locking latch
- Cablevision lock hole
- 12V jack
- Standard ¼"-xx tripod mount
Getting started
SELECT A POWER SOURCE
- Lithium or alkaline AA batteries
- 12V rechargeable battery (#KIT-12V)
- 3.7V rechargeable bombardment pack (#LIT-10
NOTE: Nosotros recommend using the SPYPOINT #LIT-10 rechargeable lithium bombardment pack, sold separately.
FOR All-time RESULTS AND NO LEAKAGE:
- Use only new lithium or alkaline batteries.
- Do non mix old and new batteries.
- Do non utilize rechargeable AA batteries (their lower voltage tin generate operational issues).
HOW TO INSTALL AA BATTERIES PROPERLY
- Unlock and open the LINK-MICRO-LTE door.
- Take the battery holder out.
- Insert the AA batteries into the battery holder post-obit polarity (+) and (-) indications.
- Place the battery holder back into the bombardment compartment.
FORMATTING YOUR MicroSD Card
Earlier inserting the MicroSD carte du jour into your camera, it must exist reformatted via a computer to ensure proper functionality.
Memory bill of fare is sold separately. Whether you cull to utilise a MicroSD bill of fare you lot previously used in another device or a brand new one you've merely bought, its capacity must not exceed 32 GB and it must exist reformatted. Do no use the "Quick format" option.
INSERTING A MicroSD Menu
- Ensure the camera is turned off.
- Insert a MicroSD memory card (up to 32 GB capacity) into the MicroSD carte du jour slot with the label facing up.
- The card is inserted correctly when a click is heard.
ACTIVATING YOUR Camera
You lot must activate your camera through the gratis "SPYPOINT app" or by logging on to the SPYPOINT.COM website.
FINDING THE ACTIVATION CODE
The activation code is located within the camera's bombardment compartment behind the bombardment holder. You volition need this unique lawmaking to activate the LINK-MICRO-LTE.
SPYPOINT APP
Follow these steps:
- On Google PlayTM or the App StoreTM, search for "SPYPOINT app".
- Download and install the app on your smartphone or tablet.
- Outset the app. Select "ACTIVATE A DEVICE". In the listing, select "LINK-MICRO-LTE" then follow the steps.
- When complete, a confirmation email will exist sent to y'all with instructions on how to finalize the creation of your business relationship will exist sent to you.
- Log in to the SPYPOINT app using your email and password.
ACTIVATING YOUR CAMERA
SPYPOINT website
Follow these steps:
- On the SPYPOINT website, select "LOGIN" in the top navigation carte du jour. On the displayed page, select "Register," fill out the required fields, and so log in.
- Select the + sign on the far right of the page; in the list, select "LINK-MICRO-LTE," then follow the steps.
- When complete, a confirmation electronic mail will exist sent to you with instructions on how to finalize the creation of your account will be sent to you.
- On the website, log in using your email and password.
Note: You tin can activate additional cameras and switch between them in the SPYPOINT app or the "MY Account" section of the SPYPOINT website.
CHOOSING A PHOTO TRANSMISSION Plan FOR YOUR Photographic camera
Become to
https://www.spypoint.com/en/spypoint-feel/plans to read the latest offers and choose the program that suits yous.
CONFIGURING YOUR CAMERA
Both the SPYPOINT app and website let you configure all the camera settings remotely. They besides provide basic data on your camera – such every bit: cellular signal strength, battery level, and MicroSD carte infinite used. This information is based upon the latest connexion with your camera. New settings take issue every time the camera connects with the SPYPOINT app or website. Below are the most basic settings yous will configure.
BASIC PHOTO SETTINGS
Delay: Allows you to set the time interval between each detection
before the camera takes the next photo.
Multishot: Allows you to set the number of photos per detection
(upwards to 2) with a 5-2nd filibuster between each photograph.
Sensitivity: Allows you to set the detection sensitivity of the camera.
Camera name: Allows y'all to proper noun each owned camera.
CELLULAR SETUP
CELLULAR SETUP
Offset transfer fourth dimension: Allows yous to choose the time when the camera makes its first transfer of the twenty-four hour period.
Transfer frequency: Allows you to choose the number of daily transfers.
Avant-garde OPTIONS/CONFIGURATION
Schedule: Allows you to set the period of operation for each
day of the calendar week. For a 24-hour functioning manner, both the starting time
and stop times must exist 12 AM.
Notation: Camera transfers are set up by default to every 4 hours from midnight.
STARTING YOUR Camera
- Plow on the photographic camera.
- The dark-green "Condition" light volition flash while searching for a signal (tin have a few minutes).
- The "Condition" light volition calorie-free upward in ane of the following three colors:
Red: Insufficient point.
Orangish: Adequate signal.
Green: Optimal signal. - When the elevation right lite flashes cherry, 30 seconds remain before the photo mode is turned on. This allows you to leave the area without being photographed.
- The camera is fix for use when all the lights turn off.
- If the lite is red during step iii, you should:
- Plough your camera off and and so back on.
- Retry while pointing the antenna at different angles.
- Try moving it to a spot with better signal.
- Try our #CA-01 long-range cellular antenna (sold separately), which could help ameliorate signal force.
INSTALLING YOUR Camera
- Mount the photographic camera using the installation strap.
- The photographic camera should exist at the aforementioned height equally the fauna's mid-body.
- The targeted animal should be at 25 feet/seven.5 meters away from the camera.
- For brighter pictures at night, ensure you have elements in the groundwork to reverberate the IR wink.
DISPOSAL
But USE ORIGINAL SPARE PARTS AND ACCESSORIES.
If one 24-hour interval your photographic camera has been used so intensively that information technology has to be replaced, or if you no longer have any use for it, y'all are obliged to dispose of it at a recycling center.
Information on return points for your electrical appliance tin exist obtained from your local waste disposal company or from your local administrative offices.
Electrical appliances not only contain valuable recyclable raw materials, but also substances which, if disposed of improperly, can affect public health and the environment. Help ensure that valuable raw materials are recycled when you return your quondam appliance to a central collection betoken.
The WEEE (Waste matter Electrical and Electronic Equipment Directive ) symbol represents the obligation that the labeled camera to be sent to a separate middle for the proper recycling of electrical and electronic equipment.
FREQUENCY
FREQUENCY RANGE:
800/ 850/ 900/ 1900/ 2100MHz
MAXIMUM TRANSMISSION POWER:
FREQUENCY | MAX |
GSM850 | 33DBM±2DB |
EGSM900 | 33DBM±2DB |
33DBM±2DB | 30DBM±2DB |
PCS1900 | 30DBM±2DB |
GSM850 (8-PSK) | 27DBM±3DB |
EGSM900 (viii-PSK) | 27DBM±3DB |
DCS1800 (8-PSK) | 26DBM±3DB |
PCS1900 (8-PSK) | 26DBM±3DB |
UMTS 2100 | 24DBM+1.7/-three.7DB |
UMTS 1900 | 24DBM+ane.7/-iii.7DB |
UMTS 900 | 24DBM+1.7/-three.7DB |
UMTS 850 | 24DBM+1.seven/-3.7DB |
UMTS 800 | 24DBM+ane.seven/-3.7DB |
FFC
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions:
- This device must not cause harmful interference.
- This device must accept any interference received, including interference that may crusade undesired operation.
For a complete list of specifications, features, and settings, visit our LINK-MICRO-LTE folio at www.spypoint.com.
Cheers FOR CHOOSING
FAQ, user manual & latest
firmware bachelor at:
Support.SPYPOINT.COM
Bring together THE COMMUNITY
Sit down back and relax equally this device is covered by the "Know you lot're covered" 2-year warranty. We strive to provide our customers with a positive experience and an outstanding service.
Documents / Resources
References
Source: https://manuals.plus/spypoint/link-micro-lte-cellular-trail-camera-manual
0 Response to "How To Set Up Spypoint Micro Lte"
Post a Comment